Previously, systemd_restart() sent SIGUSR1 to the gateway, printed
'restart requested', and returned immediately. The gateway still
needed to drain active agents, exit with code 75, wait for systemd's
RestartSec=30, and start the new process. The user saw 'success' but
the gateway was actually down for 30-60 seconds.
Now the SIGUSR1 path blocks with progress feedback:
Phase 1 — wait for old process to die:
⏳ User service draining active work...
Polls os.kill(pid, 0) until ProcessLookupError (up to 90s)
Phase 2 — wait for new process to become active:
⏳ Waiting for hermes-gateway to restart...
Polls systemctl is-active + verifies new PID (up to 60s)
Success:
✓ User service restarted (PID 12345)
Timeout:
⚠ User service did not become active within 60s.
Check status: hermes gateway status
Check logs: journalctl --user -u hermes-gateway --since '2 min ago'
The reload-or-restart fallback path (line 1189) already blocks because
systemctl reload-or-restart is synchronous.
Test plan:
- Updated test to verify wait-for-restart behavior
- All 118 gateway CLI tests pass
When a session gets stuck (hung terminal, runaway tool loop) and the
user restarts the gateway, the same session history loads and puts the
agent right back in the stuck state. The user is trapped in a loop:
restart → stuck → restart → stuck.
Fix: track restart-failure counts per session using a simple JSON file
(.restart_failure_counts). On each shutdown with active agents, the
counter increments for those sessions. On startup, if any session has
been active across 3+ consecutive restarts, it's auto-suspended —
giving the user a clean slate on their next message.
The counter resets to 0 when a session completes a turn successfully
(response delivered), so normal sessions that happen to be active
during planned restarts (/restart, hermes update) won't accumulate
false counts.
Implementation:
- _increment_restart_failure_counts(): called during stop() when
agents are active. Writes {session_key: count} to JSON file.
Sessions NOT active are dropped (loop broken).
- _suspend_stuck_loop_sessions(): called on startup. Reads the file,
suspends sessions at threshold (3), clears the file.
- _clear_restart_failure_count(): called after successful response
delivery. Removes the session from the counter file.
No SessionEntry schema changes. No database migration. Pure file-based
tracking that naturally cleans up.
Test plan:
- 9 new stuck-loop tests (increment, accumulate, threshold, clear,
suspend, file cleanup, edge cases)
- All 28 gateway lifecycle tests pass (restart drain + auto-continue
+ stuck loop)
When the gateway restarts mid-agent-work, the session transcript ends
on a tool result the agent never processed. Previously, the user had
to type 'continue' or use /retry (which replays from scratch, losing
all prior work).
Now, when the next user message arrives and the loaded history ends
with role='tool', a system note is prepended:
[System note: Your previous turn was interrupted before you could
process the last tool result(s). Please finish processing those
results and summarize what was accomplished, then address the
user's new message below.]
This is injected in _run_agent()'s run_sync closure, right before
calling agent.run_conversation(). The agent sees the full history
(including the pending tool results) and the system note, so it can
summarize what was accomplished and then handle the user's new input.
Design decisions:
- No new session flags or schema changes — purely detects trailing
tool messages in the loaded history
- Works for any restart scenario (clean, crash, SIGTERM, drain timeout)
as long as the session wasn't suspended (suspended = fresh start)
- The user's actual message is preserved after the note
- If the session WAS suspended (unclean shutdown), the old history is
abandoned and the user starts fresh — no false auto-continue
Also updates the shutdown notification message from 'Use /retry after
restart to continue' to 'Send any message after restart to resume
where it left off' — which is now accurate.
Test plan:
- 6 new auto-continue tests (trailing tool detection, no false
positives for assistant/user/empty history, multi-tool, message
preservation)
- All 13 restart drain tests pass (updated /retry assertion)
Refactor browser tool PATH construction to include Termux directories
(/data/data/com.termux/files/usr/bin, /data/data/com.termux/files/usr/sbin)
so agent-browser and npx are discoverable on Android/Termux.
Extracts _browser_candidate_path_dirs() and _merge_browser_path() helpers
to centralize PATH construction shared between _find_agent_browser() and
_run_browser_command(), replacing duplicated inline logic.
Also fixes os.pathsep usage (was hardcoded ':') for cross-platform correctness.
Cherry-picked from PR #9846.
Instead of consuming one top-level slash command slot per skill (hitting the
100-command limit with ~26 built-ins + 74 skills), skills are now organized
under a single /skill group command with category-based subcommand groups:
/skill creative ascii-art [args]
/skill media gif-search [args]
/skill mlops axolotl [args]
Discord supports 25 subcommand groups × 25 subcommands = 625 max skills,
well beyond the previous 74-slot ceiling.
Categories are derived from the skill directory structure:
- skills/creative/ascii-art/ → category 'creative'
- skills/mlops/training/axolotl/ → category 'mlops' (top-level parent)
- skills/dogfood/ → uncategorized (direct subcommand)
Changes:
- hermes_cli/commands.py: add discord_skill_commands_by_category() with
category grouping, hub/disabled filtering, Discord limit enforcement
- gateway/platforms/discord.py: replace top-level skill registration with
_register_skill_group() using app_commands.Group hierarchy
- tests: 7 new tests covering group creation, category grouping,
uncategorized skills, hub exclusion, deep nesting, empty skills,
and handler dispatch
Inspired by Discord community suggestion from bottium.
Add dangerous command patterns that require approval when the agent
tries to run gateway lifecycle commands via the terminal tool:
- hermes gateway stop/restart — kills all running agents mid-work
- hermes update — pulls code and restarts the gateway
- systemctl restart/stop (with optional flags like --user)
These patterns fire the approval prompt so the user must explicitly
approve before the agent can kill its own gateway process. In YOLO
mode, the commands run without approval (by design — YOLO means the
user accepts all risks).
Also fixes the existing systemctl pattern to handle flags between
the command and action (e.g. 'systemctl --user restart' was previously
undetected because the regex expected the action immediately after
'systemctl').
Root cause: issue #6666 reported agents running 'hermes gateway
restart' via terminal, killing the gateway process mid-agent-loop.
The user sees the agent suddenly stop responding with no explanation.
Combined with the SIGTERM auto-recovery from PR #9875, the gateway
now both prevents accidental self-destruction AND recovers if it
happens anyway.
Test plan:
- Updated test_systemctl_restart_not_flagged → test_systemctl_restart_flagged
- All 119 approval tests pass
- E2E verified: hermes gateway restart, hermes update, systemctl
--user restart all detected; hermes gateway status, systemctl
status remain safe
- TestHealthDetailedEndpoint: 3 tests for the new API server endpoint
(returns runtime data, handles missing status, no auth required)
- TestProbeGatewayHealth: 5 tests for _probe_gateway_health()
(URL normalization, successful/failed probes, fallback chain)
- TestStatusRemoteGateway: 4 tests for /api/status remote fallback
(remote probe triggers, skipped when local PID found, null PID handling)
Feishu approval clicks need the resolved card to come back from the
synchronous callback path itself. Leaving approval resolution to the
generic asynchronous card-action flow made button feedback depend on
later loop work instead of the callback response the client is waiting
for.
Change-Id: I574997cbbcaa097fdba759b47367e28d1b56b040
Constraint: Feishu card-action callbacks must acknowledge quickly and reflect final approval state from the callback response path
Rejected: Keep approval handling on the generic async card-action route | leaves card state synchronization vulnerable to callback timing and follow-up update ordering
Confidence: high
Scope-risk: narrow
Reversibility: clean
Directive: Keep approval callback response construction separate from async queue unblocking unless Feishu callback semantics change
Tested: pytest tests/gateway/test_feishu.py tests/gateway/test_feishu_approval_buttons.py tests/gateway/test_approve_deny_commands.py tests/gateway/test_slack_approval_buttons.py tests/gateway/test_telegram_approval_buttons.py -q
Not-tested: Live Feishu workspace end-to-end callback rendering
Three fixes for gateway lifecycle stability:
1. Notify active sessions before shutdown (#new)
When the gateway receives SIGTERM or /restart, it now sends a
notification to every chat with an active agent BEFORE starting
the drain. Users see:
- Shutdown: 'Gateway shutting down — your task will be interrupted.'
- Restart: 'Gateway restarting — use /retry after restart to continue.'
Deduplicates per-chat so group sessions with multiple users get
one notification. Best-effort: send failures are logged and swallowed.
2. Skip .clean_shutdown marker when drain timed out
Previously, a graceful SIGTERM always wrote .clean_shutdown, even if
agents were force-interrupted when the drain timed out. This meant
the next startup skipped session suspension, leaving interrupted
sessions in a broken state (trailing tool response, no final message).
Now the marker is only written if the drain completed without timeout,
so interrupted sessions get properly suspended on next startup.
3. Post-restart health check for hermes update (#6631)
cmd_update() now verifies the gateway actually survived after
systemctl restart (sleep 3s + is-active check). If the service
crashed immediately, it retries once. If still dead, prints
actionable diagnostics (journalctl command, manual restart hint).
Also closes#8104 — already fixed on main (the /restart handler
correctly detects systemd via INVOCATION_ID and uses via_service=True).
Test plan:
- 6 new tests for shutdown notifications (dedup, restart vs shutdown
messaging, sentinel filtering, send failure resilience)
- Existing restart drain + update tests pass (47 total)
Seed qwen-oauth credentials from resolve_qwen_runtime_credentials() in
_seed_from_singletons(). Users who authenticate via 'qwen auth qwen-oauth'
store tokens in ~/.qwen/oauth_creds.json which the runtime resolver reads
but the credential pool couldn't detect — same gap pattern as copilot.
Uses refresh_if_expiring=False to avoid network calls during discovery.
Seed copilot credentials from resolve_copilot_token() in the credential
pool's _seed_from_singletons(), alongside the existing anthropic and
openai-codex seeding logic. This makes copilot appear in the /model
provider picker when the user authenticates solely through gh auth token.
Cherry-picked from PR #9767 by Marvae.
Follow-up for cherry-picked PR #9746 — three pre-existing tests used
adapter._webhook_url (bare URL) in mock data, but _register_webhook
and _unregister_webhook now compare against _webhook_register_url
(password-bearing URL). Updated to match.
When BlueBubbles posts webhook events to the adapter, it uses the exact
URL registered via /api/v1/webhook — and BB's registration API does not
support custom headers. The adapter currently registers the bare URL
(no credentials), but then requires password auth on inbound POSTs,
rejecting every webhook with HTTP 401.
This is masked on fresh BB installs by a race condition: the webhook
might register once with a prior (possibly patched) URL and keep working
until the first restart. On v0.9.0, _unregister_webhook runs on clean
shutdown, so the next startup re-registers with the bare URL and the
401s begin. Users see the bot go silent with no obvious cause.
Root cause: there's no way to pass auth credentials from BB to the
webhook handler except via the URL itself. BB accepts query params and
preserves them on outbound POSTs.
## Fix
Introduce `_webhook_register_url` — the URL handed to BB's registration
API, with the configured password appended as a `?password=<value>`
query param. The existing webhook auth handler already accepts this
form (it reads `request.query.get("password")`), so no change to the
receive side is needed.
The bare `_webhook_url` is still used for logging and for binding the
local listener, so credentials don't leak into log output. Only the
registration/find/unregister paths use the password-bearing form.
## Notes
- Password is URL-encoded via urllib.parse.quote, handling special
characters (&, *, @, etc.) that would otherwise break parsing.
- Storing the password in BB's webhook table is not a new disclosure:
anyone with access to that table already has the BB admin password
(same credential used for every other API call).
- If `self.password` is empty (no auth configured), the register URL
is the bare URL — preserves current behavior for unauthenticated
local-only setups.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
BlueBubbles v1.9+ webhook payloads for new-message events do not always
include a top-level chatGuid field on the message data object. Instead,
the chat GUID is nested under data.chats[0].guid.
The adapter currently checks five top-level fallback locations (record and
payload, snake_case and camelCase, plus payload.guid) but never looks
inside the chats array. When none of those top-level fields contain the
GUID, the adapter falls through to using the sender's phone/email as the
session chat ID.
This causes two observable bugs when a user is a participant in both a DM
and a group chat with the bot:
1. DM and group sessions merge. Every message from that user ends up with
the same session_chat_id (their own address), so the bot cannot
distinguish which thread the message came from.
2. Outbound routing becomes ambiguous. _resolve_chat_guid() iterates all
chats and returns the first one where the address appears as a
participant; group chats typically sort ahead of DMs by activity, so
replies and cron messages intended for the DM can land in a group.
This was observed in production: a user's morning brief cron delivered to
a group chat with his spouse instead of his DM thread.
The fix adds a single fallback that extracts chat_guid from
record["chats"][0]["guid"] when the top-level fields are empty. The chats
array is included in every new-message webhook payload in BB v1.9.9
(verified against a live server). It is backwards compatible: if a future
BB version starts including chatGuid at the top level, that still wins.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Addresses responsible disclosure from FuzzMind Security Lab (CVE pending).
The web dashboard API server had 36 endpoints, of which only 5 checked
the session token. The token itself was served from an unauthenticated
GET /api/auth/session-token endpoint, rendering the protection circular.
When bound to 0.0.0.0 (--host flag), all API keys, config, and cron
management were accessible to any machine on the network.
Changes:
- Add auth middleware requiring session token on ALL /api/ routes except
a small public whitelist (status, config/defaults, config/schema,
model/info)
- Remove GET /api/auth/session-token endpoint entirely; inject the token
into index.html via a <script> tag at serve time instead
- Replace all inline token comparisons (!=) with hmac.compare_digest()
to prevent timing side-channel attacks
- Block non-localhost binding by default; require --insecure flag to
override (with warning log)
- Update frontend fetchJSON() to send Authorization header on all
requests using the injected window.__HERMES_SESSION_TOKEN__
Credit: Callum (@0xca1x) and @migraine-sudo at FuzzMind Security Lab
When GATEWAY_PROXY_URL (or gateway.proxy_url in config.yaml) is set,
the gateway becomes a thin relay: it handles platform I/O (encryption,
threading, media) and delegates all agent work to a remote Hermes API
server via POST /v1/chat/completions with SSE streaming.
This enables the primary use case of running a Matrix E2EE gateway in
Docker on Linux while the actual agent runs on the host (e.g. macOS)
with full access to local files, memory, skills, and a unified session
store. Works for any platform adapter, not just Matrix.
Configuration:
- GATEWAY_PROXY_URL env var (Docker-friendly)
- gateway.proxy_url in config.yaml
- GATEWAY_PROXY_KEY env var for API auth (matches API_SERVER_KEY)
- X-Hermes-Session-Id header for session continuity
Architecture:
- _get_proxy_url() checks env var first, then config.yaml
- _run_agent_via_proxy() handles HTTP forwarding with SSE streaming
- _run_agent() delegates to proxy path when URL is configured
- Platform streaming (GatewayStreamConsumer) works through proxy
- Returns compatible result dict for session store recording
Files changed:
- gateway/run.py: proxy mode implementation (~250 lines)
- hermes_cli/config.py: GATEWAY_PROXY_URL + GATEWAY_PROXY_KEY env vars
- tests/gateway/test_proxy_mode.py: 17 tests covering config
resolution, dispatch, HTTP forwarding, error handling, message
filtering, and result shape validation
Closes discussion from Cars29 re: Matrix gateway mixed-mode issue.
The dynamic parser walker from the contributor's commit lost the profile
name tab-completion that existed in the old static generators. This adds
it back for all three shells:
- Bash: _hermes_profiles() helper, -p/--profile completion, profile
action→name completion (use/delete/show/alias/rename/export)
- Zsh: _hermes_profiles() function, -p/--profile argument spec, profile
action case with name completion
- Fish: __hermes_profiles function, -s p -l profile flag, profile action
completions
Also removes the dead fallback path in cmd_completion() that imported
the old static generators from profiles.py (parser is always available
via the lambda wiring) and adds 11 regression-prevention tests for
profile completion.
Replaces the hardcoded completion stubs in profiles.py with a dynamic
generator that walks the live argparse parser tree at runtime.
- New hermes_cli/completion.py: _walk() recursively extracts all
subcommands and flags; generate_bash/zsh/fish() produce complete
scripts with nested subcommand support
- cmd_completion now accepts the parser via closure so completions
always reflect the actual registered commands (including plugin-
registered ones like honcho)
- completion subcommand now accepts bash | zsh | fish (fish requested
in issue comments)
- Fix _SUBCOMMANDS set: add honcho, claw, plugins, acp, webhook,
memory, dump, debug, backup, import, completion, logs so that
multi-word session names after -c/-r are not broken by these commands
- Add tests/hermes_cli/test_completion.py: 17 tests covering parser
extraction, alias deduplication, bash/zsh/fish output content,
bash syntax validation, fish syntax validation, and subcommand
drift prevention
Tested on Linux (Arch). bash and fish completion verified live.
zsh script passes syntax check (zsh not installed on test machine).
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Add ctx.register_skill() API so plugins can ship SKILL.md files under
a 'plugin:skill' namespace, preventing name collisions with built-in
Hermes skills. skill_view() detects the ':' separator and routes to
the plugin registry while bare names continue through the existing
flat-tree scan unchanged.
Key additions:
- agent/skill_utils: parse_qualified_name(), is_valid_namespace()
- hermes_cli/plugins: PluginContext.register_skill(), PluginManager
skill registry (find/list/remove)
- tools/skills_tool: qualified name dispatch in skill_view(),
_serve_plugin_skill() with full guards (disabled, platform,
injection scan), bundle context banner with sibling listing,
stale registry self-heal
- Hoisted _INJECTION_PATTERNS to module level (dedup)
- Updated skill_view schema description
Based on PR #9334 by N0nb0at. Lean P1 salvage — omits autogen shim
(P2) for a simpler first merge.
Closes#8422
- test_auth_commands: suppress _seed_from_singletons auto-seeding that
adds extra credentials from CI env (same pattern as nearby tests)
- test_interrupt: clear stale _interrupted_threads set to prevent
thread ident reuse from prior tests in same xdist worker
- test_code_execution: add watch_patterns to _BLOCKED_TERMINAL_PARAMS
to match production _TERMINAL_BLOCKED_PARAMS
During rapid tool-calling, the model often emits 1-2 tokens before
switching to tool calls. The stream consumer would create a new message
with 'X ▉' (short text + cursor), and if the follow-up edit to strip
the cursor was rate-limited by the platform, the cursor remained as
a permanent standalone message — reported on Telegram as 'white box'
artifacts.
Add a minimum-content guard in _send_or_edit: when creating a new
standalone message (no existing message_id), require at least 4
visible characters alongside the cursor before sending. Shorter text
accumulates into the next streaming segment instead.
This prevents cursor-only 'tofu' messages across all platforms without
affecting normal streaming (edits to existing messages, final sends
without cursor, and messages with substantial text are all unaffected).
Reported by @michalkomar on X.
Production fixes:
- Add clear_session_context() to hermes_logging.py (fixes 48 teardown errors)
- Add clear_session() to tools/approval.py (fixes 9 setup errors)
- Add SyncError M_UNKNOWN_TOKEN check to Matrix _sync_loop (bug fix)
- Fall back to inline api_key in named custom providers when key_env
is absent (runtime_provider.py)
Test fixes:
- test_memory_user_id: use builtin+external provider pair, fix honcho
peer_name override test to match production behavior
- test_display_config: remove TestHelpers for non-existent functions
- test_auxiliary_client: fix OAuth tokens to match _is_oauth_token
patterns, replace get_vision_auxiliary_client with resolve_vision_provider_client
- test_cli_interrupt_subagent: add missing _execution_thread_id attr
- test_compress_focus: add model/provider/api_key/base_url/api_mode
to mock compressor
- test_auth_provider_gate: add autouse fixture to clean Anthropic env
vars that leak from CI secrets
- test_opencode_go_in_model_list: accept both 'built-in' and 'hermes'
source (models.dev API unavailable in CI)
- test_email: verify email Platform enum membership instead of source
inspection (build_channel_directory now uses dynamic enum loop)
- test_feishu: add bot_added/bot_deleted handler mocks to _Builder
- test_ws_auth_retry: add AsyncMock for sync_store.get_next_batch,
add _pending_megolm and _joined_rooms to Matrix adapter mocks
- test_restart_drain: monkeypatch-delete INVOCATION_ID (systemd sets
this in CI, changing the restart call signature)
- test_session_hygiene: add user_id to SessionSource
- test_session_env: use relative baseline for contextvar clear check
(pytest-xdist workers share context)
- Add Platform.QQBOT to _UPDATE_ALLOWED_PLATFORMS (enables /update command)
- Add 'qqbot' to webhook cross-platform delivery routing
- Add 'qqbot' to hermes dump platform detection
- Fix test_name_property casing: 'QQBot' not 'QQBOT'
- Add _parse_qq_timestamp() for ISO 8601 + integer ms compatibility
(QQ API changed timestamp format — from PR #2411 finding)
- Wire timestamp parsing into all 4 message handlers
- Rename platform from 'qq' to 'qqbot' across all integration points
(Platform enum, toolset, config keys, import paths, file rename qq.py → qqbot.py)
- Add PLATFORM_HINTS for QQBot in prompt_builder (QQ supports markdown)
- Set SUPPORTS_MESSAGE_EDITING = False to skip streaming on QQ
(prevents duplicate messages from non-editable partial + final sends)
- Add _send_qqbot() standalone send function for cron/send_message tool
- Add interactive _setup_qq() wizard in hermes_cli/setup.py
- Restore missing _setup_signal/email/sms/dingtalk/feishu/wecom/wecom_callback
functions that were lost during the original merge
Add a second light-mode skin option with warm brown/parchment tones,
adapted from ygd58's contribution in PR #4811. Includes completion
menu and status bar color keys for full light-terminal support.
Co-authored-by: buray <78954051+ygd58@users.noreply.github.com>
GPT-5.4 supports none/low/medium/high/xhigh but not 'minimal'.
Users may configure 'minimal' via OpenRouter conventions, which would
cause a 400 on native OpenAI. Clamp to 'low' in the codex_responses
path before sending.
* feat(skills): add fitness-nutrition skill to optional-skills
Cherry-picked from PR #9177 by @haileymarshall.
Adds a fitness and nutrition skill for gym-goers and health-conscious users:
- Exercise search via wger API (690+ exercises, free, no auth)
- Nutrition lookup via USDA FoodData Central (380K+ foods, DEMO_KEY fallback)
- Offline body composition calculators (BMI, TDEE, 1RM, macros, body fat %)
- Pure stdlib Python, no pip dependencies
Changes from original PR:
- Moved from skills/ to optional-skills/health/ (correct location)
- Fixed BMR formula in FORMULAS.md (removed confusing -5+10, now just +5)
- Fixed author attribution to match PR submitter
- Marked USDA_API_KEY as optional (DEMO_KEY works without signup)
Also adds optional env var support to the skill readiness checker:
- New 'optional: true' field in required_environment_variables entries
- Optional vars are preserved in metadata but don't block skill readiness
- Optional vars skip the CLI capture prompt flow
- Skills with only optional missing vars show as 'available' not 'setup_needed'
* fix: auto-correct close model name matches in /model validation
When a user types a model name with a minor typo (e.g. gpt5.3-codex instead
of gpt-5.3-codex), the validation now auto-corrects to the closest match
instead of accepting the wrong name with a warning.
Uses difflib get_close_matches with cutoff=0.9 to avoid false corrections
(e.g. gpt-5.3 should not silently become gpt-5.4). Applied consistently
across all three validation paths: codex provider, custom endpoints, and
generic API-probed providers.
The validate_requested_model() return dict gains an optional corrected_model
key that switch_model() applies before building the result.
Reported by Discord user — /model gpt5.3-codex was accepted with a warning
but would fail at the API level.
---------
Co-authored-by: haileymarshall <haileymarshall@users.noreply.github.com>
During custom endpoint setup, users are now asked for a display name
with the auto-generated name as the default. Typing 'Ollama' or
'LM Studio' replaces the generic 'Local (localhost:11434)' in the
provider menu.
Extracts _auto_provider_name() for reuse and adds a name= parameter
to _save_custom_provider() so the caller can pass through the
user-chosen label.
Models like MiniMax emit inline <think>...</think> reasoning blocks in
their content field. The CLI already suppresses these via a state machine
in _stream_delta, but the gateway's GatewayStreamConsumer had no
equivalent filtering — raw think blocks were streamed directly to
Discord/Telegram/Slack.
The fix adds a _filter_and_accumulate() method that mirrors the CLI's
approach: a state machine tracks whether we're inside a reasoning block
and silently discards the content. Includes the same block-boundary
check (tag must appear at line start or after whitespace-only prefix)
to avoid false positives when models mention <think> in prose.
Handles all tag variants: <think>, <thinking>, <THINKING>, <thought>,
<reasoning>, <REASONING_SCRATCHPAD>.
Also handles edge cases:
- Tags split across streaming deltas (partial tag buffering)
- Unclosed blocks (content suppressed until stream ends)
- Multiple consecutive blocks
- _flush_think_buffer on stream end for held-back partial tags
Adds 22 unit tests + 1 integration test covering all scenarios.
Plugins can now return {"action": "block", "message": "reason"} from
their pre_tool_call hook to prevent a tool from executing. The error
message is returned to the model as a tool result so it can adjust.
Covers both execution paths: handle_function_call (model_tools.py) and
agent-level tools (run_agent.py _invoke_tool + sequential/concurrent).
Blocked tools skip all side effects (counter resets, checkpoints,
callbacks, read-loop tracker).
Adds skip_pre_tool_call_hook flag to avoid double-firing the hook when
run_agent.py already checked and then calls handle_function_call.
Salvaged from PR #5385 (gianfrancopiana) and PR #4610 (oredsecurity).
When the 5-second stream_task timeout in gateway/run.py expires (due to
slow Telegram API calls from rate limiting after several messages), the
stream consumer is cancelled via asyncio.CancelledError. The
CancelledError handler did a best-effort final edit but never set
final_response_sent, so the gateway fell through to the normal send path
and delivered the full response again as a reply — causing a duplicate.
The fix: in the CancelledError handler, set final_response_sent = True
when already_sent is True (i.e., the stream consumer had already
delivered content to the user). This tells the gateway's already_sent
check that the response was delivered, preventing the duplicate send.
Adds two tests verifying the cancellation behavior:
- Cancelled with already_sent=True → final_response_sent=True (no dup)
- Cancelled with already_sent=False → final_response_sent=False (normal
send path proceeds)
Reported by community user hume on Discord.
Port two improvements inspired by Kilo-Org/kilocode analysis:
1. Error classifier: add context overflow patterns for vLLM, Ollama,
and llama.cpp/llama-server. These local inference servers return
different error formats than cloud providers (e.g., 'exceeds the
max_model_len', 'context length exceeded', 'slot context'). Without
these patterns, context overflow errors from local servers are
misclassified as format errors, causing infinite retries instead
of triggering compression.
2. MCP initial connection retry: previously, if the very first
connection attempt to an MCP server failed (e.g., transient DNS
blip at startup), the server was permanently marked as failed with
no retry. Post-connect reconnection had 5 retries with exponential
backoff, but initial connection had zero. Now initial connections
retry up to 3 times with backoff before giving up, matching the
resilience of post-connect reconnection.
(Inspired by Kilo Code's MCP server disappearing fix in v1.3.3)
Tests: 6 new error classifier tests, 4 new MCP retry tests, 1
updated existing test. All 276 affected tests pass.
Adds Arcee AI as a standard direct provider (ARCEEAI_API_KEY) with
Trinity models: trinity-large-thinking, trinity-large-preview, trinity-mini.
Standard OpenAI-compatible provider checklist: auth.py, config.py,
models.py, main.py, providers.py, doctor.py, model_normalize.py,
model_metadata.py, setup.py, trajectory_compressor.py.
Based on PR #9274 by arthurbr11, simplified to a standard direct
provider without dual-endpoint OpenRouter routing.
The dashboard device-code flow (_nous_poller in web_server.py) saved
credentials to the credential pool only, while get_nous_auth_status()
only checked the auth store (auth.json). This caused the Keys tab to
show 'not connected' even when the backend was fully authenticated.
Two fixes:
1. get_nous_auth_status() now checks the credential pool first (like
get_codex_auth_status() already does), then falls back to the auth
store.
2. _nous_poller now also persists to the auth store after saving to
the credential pool, matching the CLI flow (_login_nous).
Adds 3 tests covering pool-only, auth-store-fallback, and empty-state
scenarios.
/stop was calling suspend_session() which marked the session for auto-reset
on the next message. This meant users lost their conversation history every
time they stopped a running agent — especially painful for untitled sessions
that can't be resumed by name.
Now /stop just interrupts the agent and cleans the session lock. The session
stays intact so users can continue the conversation.
The suspend behavior was introduced in #7536 to break stuck session resume
loops on gateway restart. That case is already handled by
suspend_recently_active() which runs at gateway startup, so removing it from
/stop doesn't regress the original fix.
Previously, long-running streamed responses could be incorrectly treated
as idle by the gateway/cron inactivity timeout even while tokens were
actively arriving. The _touch_activity() call (which feeds
get_activity_summary() polled by the external timeout) was either called
only on the first chunk (chat completions) or not at all (Anthropic,
Codex, Codex fallback).
Add _touch_activity() on every chunk/event in all four streaming paths
so the inactivity monitor knows data is still flowing.
Fixes#8760
The v11→v12 migration converts custom_providers (list) into providers
(dict), then deletes the list. But all runtime resolvers read from
custom_providers — after migration, named custom endpoints silently stop
resolving and fallback chains fail with AuthError.
Add get_compatible_custom_providers() that reads from both config schemas
(legacy custom_providers list + v12+ providers dict), normalizes entries,
deduplicates, and returns a unified list. Update ALL consumers:
- hermes_cli/runtime_provider.py: _get_named_custom_provider() + key_env
- hermes_cli/auth_commands.py: credential pool provider names
- hermes_cli/main.py: model picker + _model_flow_named_custom()
- agent/auxiliary_client.py: key_env + custom_entry model fallback
- agent/credential_pool.py: _iter_custom_providers()
- cli.py + gateway/run.py: /model switch custom_providers passthrough
- run_agent.py + gateway/run.py: per-model context_length lookup
Also: use config.pop() instead of del for safer migration, fix stale
_config_version assertions in tests, add pool mock to codex test.
Co-authored-by: 墨綠BG <s5460703@gmail.com>
Closes#8776, salvaged from PR #8814
The existing ASCII codec handler only sanitized conversation messages,
leaving tool schemas, system prompts, ephemeral prompts, prefill messages,
and HTTP headers as unhandled sources of non-ASCII content. On systems
with LANG=C or non-UTF-8 locale, Unicode symbols in tool descriptions
(e.g. arrows, em-dashes from prompt_builder) and system prompt content
would cause UnicodeEncodeError that fell through to the error path.
Changes:
- Add _sanitize_structure_non_ascii() generic recursive walker for
nested dict/list payloads
- Add _sanitize_tools_non_ascii() thin wrapper for tool schemas
- Add _force_ascii_payload flag: once ASCII locale is detected, all
subsequent API calls get proactively sanitized (prevents recurring
failures from new tool results bringing fresh Unicode each turn)
- Extend the ASCII codec error handler to sanitize: prefill_messages,
tool schemas (self.tools), system prompt, ephemeral system prompt,
and default HTTP headers
- Update stale comment that acknowledged the gap
Cherry-picked from PR #8834 (credential pool changes dropped as
separate concern).
Two fixes for user-defined providers in config.yaml:
1. list_authenticated_providers() - now includes full models list from
providers.*.models array, not just default_model. This fixes /model
showing only one model when multiple are configured.
2. _get_named_custom_provider() - now checks providers: dict (new-style)
in addition to custom_providers: list (legacy). This fixes credential
resolution errors when switching models via /model command.
Both changes are backwards compatible with existing custom_providers list format.
Fixes: Only one model appears for custom providers in /model selection
On macOS, /etc is a symlink to /private/etc, so os.path.realpath()
resolves /etc/hosts to /private/etc/hosts. The sensitive path check
only matched /etc/ prefixes against the resolved path, allowing
writes to system files on macOS.
- Add /private/etc/ and /private/var/ to _SENSITIVE_PATH_PREFIXES
- Check both realpath-resolved and normpath-normalized paths
- Add regression tests for macOS symlink bypass
Closes#8734
Co-authored-by: ElhamDevelopmentStudio (PR #8829)
These functions were duplicated between auth.py and copilot_auth.py.
The auth.py copies had zero production callers — only copilot_auth.py's
versions are used. Redirect the test import to the live copy and update
monkeypatch targets accordingly.
resolve_vision_provider_client() computed resolved_api_mode from config
but never passed it to downstream resolve_provider_client() or
_get_cached_client() calls, causing custom providers with
api_mode: anthropic_messages to crash when used for vision tasks.
Also remove the for_vision special case in _normalize_aux_provider()
that incorrectly discarded named custom provider identifiers.
Fixes#8857
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Remove the backward-compat code paths that read compression provider/model
settings from legacy config keys and env vars, which caused silent failures
when auto-detection resolved to incompatible backends.
What changed:
- Remove compression.summary_model, summary_provider, summary_base_url from
DEFAULT_CONFIG and cli.py defaults
- Remove backward-compat block in _resolve_task_provider_model() that read
from the legacy compression section
- Remove _get_auxiliary_provider() and _get_auxiliary_env_override() helper
functions (AUXILIARY_*/CONTEXT_* env var readers)
- Remove env var fallback chain for per-task overrides
- Update hermes config show to read from auxiliary.compression
- Add config migration (v16→17) that moves non-empty legacy values to
auxiliary.compression and strips the old keys
- Update example config and openclaw migration script
- Remove/update tests for deleted code paths
Compression model/provider is now configured exclusively via:
auxiliary.compression.provider / auxiliary.compression.model
Closes#8923
Updated the acquire_scoped_lock function to treat empty or corrupt lock files as stale. This change ensures that if a lock file exists but is invalid, it will be removed to prevent issues with stale locks. Added tests to verify recovery from both empty and corrupt lock files.
Three targeted changes to close the gaps between retry layers that
caused users to experience 'No response from provider for 580s' and
'No activity for 15 minutes' despite having 5 layers of retry:
1. Remove non-streaming fallback from streaming path
Previously, when all 3 stream retries exhausted, the code fell back
to _interruptible_api_call() which had no stale detection and no
activity tracking — a black hole that could hang for up to 1800s.
Now errors propagate to the main retry loop which has richer recovery
(credential rotation, provider fallback, backoff).
For 'stream not supported' errors, sets _disable_streaming flag so
the main retry loop automatically switches to non-streaming on the
next attempt.
2. Add _touch_activity to recovery dead zones
The gateway inactivity monitor relies on _touch_activity() to know
the agent is alive, but activity was never touched during:
- Stale stream detection/kill cycles (180-300s gaps)
- Stream retry connection rebuilds
- Main retry backoff sleeps (up to 120s)
- Error recovery classification
Now all these paths touch activity every ~30s, keeping the gateway
informed during recovery cycles.
3. Add stale-call detector to non-streaming path
_interruptible_api_call() now has the same stale detection pattern
as the streaming path: kills hung connections after 300s (default,
configurable via HERMES_API_CALL_STALE_TIMEOUT), scaled for large
contexts (450s for 50K+ tokens, 600s for 100K+ tokens), disabled
for local providers.
Also touches activity every ~30s during the wait so the gateway
monitor stays informed.
Env vars:
- HERMES_API_CALL_STALE_TIMEOUT: non-streaming stale timeout (default 300s)
- HERMES_STREAM_STALE_TIMEOUT: unchanged (default 180s)
Before: worst case ~2+ hours of sequential retries with no feedback
After: worst case bounded by gateway inactivity timeout (default 1800s)
with continuous activity reporting
- Store source metadata on /voice channel join so voice input shares the
same session as the linked text channel conversation
- Treat voice-linked text channels as free-response (skip @mention and
auto-thread) while voice is active
- Scope the voice-linked exemption to the exact bound channel, not
sibling threads
- Guard signal handler registration in start_gateway() for non-main
threads (prevents RuntimeError when gateway runs in a daemon thread)
- Clean up _voice_sources on leave_voice_channel
Salvaged from PR #3475 by twilwa (Modal runtime portions excluded).
Three changes consolidated into the existing backup system:
1. Fix: hermes backup now uses sqlite3.Connection.backup() for .db files
instead of raw file copy. Raw copy of a WAL-mode database can produce
a corrupted backup — the backup() API handles this correctly.
2. hermes backup --quick: fast snapshot of just critical state files
(config.yaml, state.db, .env, auth.json, cron/jobs.json, etc.)
stored in ~/.hermes/state-snapshots/. Auto-prunes to 20 snapshots.
3. /snapshot slash command (alias /snap): in-session interface for
quick state snapshots. create/list/restore/prune subcommands.
Restore by ID or number. Powered by the same backup module.
No new modules — everything lives in hermes_cli/backup.py alongside
the existing full backup/import code.
No hooks in run_agent.py — purely on-demand, zero runtime overhead.
Closes the use case from PRs #8406 and #7813 with ~200 lines of new
logic instead of a 1090-line content-addressed storage engine.
- Move test file to tests/hermes_cli/ (consistent with test layout)
- Remove unused imports (os, pytest) from test file
- Update _sanitize_env_lines docstring: now used on read + write paths
When .env files become corrupted (e.g. concatenated KEY=VALUE pairs on
a single line due to concurrent writes or encoding issues), both
python-dotenv and load_env() would parse the entire concatenated string
as a single value. This caused bot tokens to appear duplicated up to 8×,
triggering InvalidToken errors from the Telegram API.
Root cause: _sanitize_env_lines() — which correctly splits concatenated
lines — was only called during save_env_value() writes, not during reads.
Fix:
- load_env() now calls _sanitize_env_lines() before parsing
- env_loader.load_hermes_dotenv() sanitizes the .env file on disk
before python-dotenv reads it, so os.getenv() also returns clean values
- Added tests reproducing the exact corruption pattern from #8908Closes#8908
The startup warning that Nous Research Hermes 3 & 4 models are not agentic
fired on any model whose name contained "hermes" anywhere, via a plain
substring check. That false-positived on unrelated local Modelfiles such
as `hermes-brain:qwen3-14b-ctx16k` — a tool-capable Qwen3 wrapper that
happens to live under a custom "hermes" tag namespace — making the warning
noise for legitimate setups.
Replace the substring check with a narrow regex anchored on `^`, `/`, or
`:` boundaries that only matches the real Hermes-3 / Hermes-4 chat family
(e.g. `NousResearch/Hermes-3-Llama-3.1-70B`, `hermes-4-405b`,
`openrouter/hermes3:70b`). Consolidate into a single helper
`is_nous_hermes_non_agentic()` in `hermes_cli.model_switch` so the CLI
and the canonical check don't drift, and route the duplicate inline site
in `cli.HermesCLI._print_warnings()` through the helper.
Add a parametrized test covering positive matches (real Hermes-3/-4
names) and a broad set of negatives (custom Modelfiles, Qwen/Claude/GPT,
older Nous-Hermes-2 families, bare "hermes", empty string, and the
"brain-hermes-3-impostor" boundary case).
_query_local_context_length was checking model_info.context_length
(the GGUF training max) before num_ctx (the Modelfile runtime override),
inverse to query_ollama_num_ctx. The two helpers therefore disagreed on
the same model:
hermes-brain:qwen3-14b-ctx32k # Modelfile: num_ctx 32768
underlying qwen3:14b GGUF # qwen3.context_length: 40960
query_ollama_num_ctx correctly returned 32768 (the value Ollama will
actually allocate KV cache for). _query_local_context_length returned
40960, which let ContextCompressor grow conversations past 32768 before
triggering compression — at which point Ollama silently truncated the
prefix, corrupting context.
Swap the order so num_ctx is checked first, matching query_ollama_num_ctx.
Adds a parametrized test that seeds both values and asserts num_ctx wins.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
When streaming fails after partial content delivery (e.g. OpenRouter
timeout kills connection mid-response), the stub response now carries
the accumulated streamed text instead of content=None.
Two fixes:
1. The partial-stream stub response includes recovered content from
_current_streamed_assistant_text — the text that was already
delivered to the user via stream callbacks before the connection
died.
2. The empty response recovery chain now checks for partial stream
content BEFORE falling back to _last_content_with_tools (prior
turn content) or wasting API calls on retries. This prevents:
- Showing wrong content from a prior turn
- Burning 3+ unnecessary retry API calls
- Falling through to '(empty)' when the user already saw content
The root cause: OpenRouter has a ~125s inactivity timeout. When
Anthropic's SSE stream goes silent during extended reasoning, the
proxy kills the connection. The model's text was already partially
streamed but the stub discarded it, triggering the empty recovery
chain which would show stale prior-turn content or waste retries.
The detached bash subprocess spawned by /restart gets killed by
systemd's KillMode=mixed cgroup cleanup, leaving the gateway dead.
Under systemd (detected via INVOCATION_ID env var), /restart now uses
via_service=True which exits with code 75 — RestartForceExitStatus=75
in the unit file makes systemd auto-restart the service. The detached
subprocess approach is preserved as fallback for non-systemd
environments (Docker, tmux, foreground mode).
* feat: web UI dashboard for managing Hermes Agent (salvage of #8204/#7621)
Adds an embedded web UI dashboard accessible via `hermes web`:
- Status page: agent version, active sessions, gateway status, connected platforms
- Config editor: schema-driven form with tabbed categories, import/export, reset
- API Keys page: set, clear, and view redacted values with category grouping
- Sessions, Skills, Cron, Logs, and Analytics pages
Backend:
- hermes_cli/web_server.py: FastAPI server with REST endpoints
- hermes_cli/config.py: reload_env() utility for hot-reloading .env
- hermes_cli/main.py: `hermes web` subcommand (--port, --host, --no-open)
- cli.py / commands.py: /reload slash command for .env hot-reload
- pyproject.toml: [web] optional dependency extra (fastapi + uvicorn)
- Both update paths (git + zip) auto-build web frontend when npm available
Frontend:
- Vite + React + TypeScript + Tailwind v4 SPA in web/
- shadcn/ui-style components, Nous design language
- Auto-refresh status page, toast notifications, masked password inputs
Security:
- Path traversal guard (resolve().is_relative_to()) on SPA file serving
- CORS localhost-only via allow_origin_regex
- Generic error messages (no internal leak), SessionDB handles closed properly
Tests: 47 tests covering reload_env, redact_key, API endpoints, schema
generation, path traversal, category merging, internal key stripping,
and full config round-trip.
Original work by @austinpickett (PR #1813), salvaged by @kshitijk4poor
(PR #7621 → #8204), re-salvaged onto current main with stale-branch
regressions removed.
* fix(web): clean up status page cards, always rebuild on `hermes web`
- Remove config version migration alert banner from status page
- Remove config version card (internal noise, not surfaced in TUI)
- Reorder status cards: Agent → Gateway → Active Sessions (3-col grid)
- `hermes web` now always rebuilds from source before serving,
preventing stale web_dist when editing frontend files
* feat(web): full-text search across session messages
- Add GET /api/sessions/search endpoint backed by FTS5
- Auto-append prefix wildcards so partial words match (e.g. 'nimb' → 'nimby')
- Debounced search (300ms) with spinner in the search icon slot
- Search results show FTS5 snippets with highlighted match delimiters
- Expanding a search hit auto-scrolls to the first matching message
- Matching messages get a warning ring + 'match' badge
- Inline term highlighting within Markdown (text, bold, italic, headings, lists)
- Clear button (x) on search input for quick reset
---------
Co-authored-by: emozilla <emozilla@nousresearch.com>
When a user sends /restart, the gateway now persists their routing info
(platform, chat_id, thread_id) to .restart_notify.json. After the new
gateway process starts and adapters connect, it reads the file, sends a
'Gateway restarted successfully' message to that specific chat, and
cleans up the file.
This follows the same pattern as _send_update_notification (used by
/update). Thread IDs are preserved so the notification lands in the
correct Telegram topic or Discord thread.
Previously, after /restart the user had no feedback that the gateway was
back — they had to send a message to find out. Now they get a proactive
notification and know their session continues.
OpenCode Zen was in _DOT_TO_HYPHEN_PROVIDERS, causing all dotted model
names (minimax-m2.5-free, gpt-5.4, glm-5.1) to be mangled. The fix:
Layer 1 (model_normalize.py): Remove opencode-zen from the blanket
dot-to-hyphen set. Add an explicit block that preserves dots for
non-Claude models while keeping Claude hyphenated (Zen's Claude
endpoint uses anthropic_messages mode which expects hyphens).
Layer 2 (run_agent.py _anthropic_preserve_dots): Add opencode-zen and
zai to the provider allowlist. Broaden URL check from opencode.ai/zen/go
to opencode.ai/zen/ to cover both Go and Zen endpoints. Add bigmodel.cn
for ZAI URL detection.
Also adds glm-5.1 to ZAI model lists in models.py and setup.py.
Closes#7710
Salvaged from contributions by:
- konsisumer (PR #7739, #7719)
- DomGrieco (PR #8708)
- Esashiero (PR #7296)
- sharziki (PR #7497)
- XiaoYingGee (PR #8750)
- APTX4869-maker (PR #8752)
- kagura-agent (PR #7157)
When tool_preview_length is 0 (default for platforms without a tier
default, like Session), verbose mode was truncating args JSON to 200
characters. Since the user explicitly opted into verbose mode, they
expect full tool call detail — the 200-char cap defeated the purpose.
Now: tool_preview_length=0 means no truncation in verbose mode.
Positive values still cap as before. Platform message-length limits
handle overflow naturally.
Three changes that address the poor WhatsApp experience reported by users:
1. Reclassify WhatsApp from TIER_LOW to TIER_MEDIUM in display_config.py
— enables streaming and tool progress via the existing Baileys /edit
bridge endpoint. Users now see progressive responses instead of
minutes of silence followed by a wall of text.
2. Lower MAX_MESSAGE_LENGTH from 65536 to 4096 and add proper chunking
— send() now calls format_message() and truncate_message() before
sending, then loops through chunks with a small delay between them.
The base class truncate_message() already handles code block boundary
detection (closes/reopens fences at chunk boundaries). reply_to is
only set on the first chunk.
3. Override format_message() with WhatsApp-specific markdown conversion
— converts **bold** to *bold*, ~~strike~~ to ~strike~, headers to
bold text, and [links](url) to text (url). Code blocks and inline
code are protected from conversion via placeholder substitution.
Together these fix the two user complaints:
- 'sends the whole code all the time' → now chunked at 4K with proper
formatting
- 'terminal gets interrupted and gets cooked' → streaming + tool progress
give visual feedback so users don't accidentally interrupt with
follow-up messages
When resuming a session with --resume or -c, the last assistant response
was truncated to 200 chars / 3 lines just like older messages in the recap.
This forced users to waste tokens re-asking for the response.
Now the last assistant message in the recap is shown in full with non-dim
styling, so users can see exactly where they left off. Earlier messages
remain truncated for compact display.
Changes:
- Track un-truncated text for the last assistant entry during collection
- Replace last entry with full text after history trimming
- Render last assistant entry with bold (non-dim) styling
- Update existing truncation tests to use multi-message histories
- Add new tests for full last response display (char + multiline)
Port from nearai/ironclaw#2304: Telegram's 4096 character limit is
measured in UTF-16 code units, not Unicode codepoints. Characters
outside the Basic Multilingual Plane (emoji like 😀, CJK Extension B,
musical symbols) are surrogate pairs: 1 Python char but 2 UTF-16 units.
Previously, truncate_message() used Python's len() which counts
codepoints. This could produce chunks exceeding Telegram's actual limit
when messages contain many astral-plane characters.
Changes:
- Add utf16_len() helper and _prefix_within_utf16_limit() for
UTF-16-aware string measurement and truncation
- Add _custom_unit_to_cp() binary-search helper that maps a custom-unit
budget to the largest safe codepoint slice position
- Update truncate_message() to accept optional len_fn parameter
- Telegram adapter now passes len_fn=utf16_len when splitting messages
- Fix fallback truncation in Telegram error handler to use
_prefix_within_utf16_limit instead of codepoint slicing
- Update send_message_tool.py to use utf16_len for Telegram platform
- Add comprehensive tests: utf16_len, _prefix_within_utf16_limit,
truncate_message with len_fn (emoji splitting, content preservation,
code block handling)
- Update mock lambdas in reply_mode tests to accept **kw for len_fn
Port from openclaw/openclaw#64586: users who copy .env.example without
changing placeholder values now get a clear error at startup instead of
a confusing auth failure from the platform API. Also rejects placeholder
API_SERVER_KEY when binding to a network-accessible address.
Cherry-picked from PR #8677.
Port from openclaw/openclaw#64796: Per MSC3952 / Matrix v1.7, the
m.mentions.user_ids field is the authoritative mention signal. Clients
that populate m.mentions but don't duplicate @bot in the body text
were being silently dropped when MATRIX_REQUIRE_MENTION=true.
Cherry-picked from PR #8673.
* feat: add `hermes debug share` — upload debug report to pastebin
Adds a new `hermes debug share` command that collects system info
(via hermes dump), recent logs (agent.log, errors.log, gateway.log),
and uploads the combined report to a paste service (paste.rs primary,
dpaste.com fallback). Returns a shareable URL for support.
Options:
--lines N Number of log lines per file (default: 200)
--expire N Paste expiry in days (default: 7, dpaste.com only)
--local Print report locally without uploading
Files:
hermes_cli/debug.py - New module: paste upload + report collection
hermes_cli/main.py - Wire cmd_debug + argparse subparser
tests/hermes_cli/test_debug.py - 19 tests covering upload, collection, CLI
* feat: upload full agent.log and gateway.log as separate pastes
hermes debug share now uploads up to 3 pastes:
1. Summary report (system info + log tails) — always
2. Full agent.log (last ~500KB) — if file exists
3. Full gateway.log (last ~500KB) — if file exists
Each paste uploads independently; log upload failures are noted
but don't block the main report. Output shows all links aligned:
Report https://paste.rs/abc
agent.log https://paste.rs/def
gateway.log https://paste.rs/ghi
Also adds _read_full_log() with size-capped tail reading to stay
within paste service limits (~512KB per file).
* feat: prepend hermes dump to each log paste for self-contained context
Each paste (agent.log, gateway.log) now starts with the hermes dump
output so clicking any single link gives full system context without
needing to cross-reference the summary report.
Refactored dump capture into _capture_dump() — called once and
reused across the summary report and each log paste.
* fix: fall back to .1 rotated log when primary log is missing or empty
When gateway.log (or agent.log) doesn't exist or is empty, the debug
share now checks for the .1 rotation file. This is common — the
gateway rotates logs and the primary file may not exist yet.
Extracted _resolve_log_path() to centralize the fallback logic for
both _read_log_tail() and _read_full_log().
* chore: remove unused display_hermes_home import
Some OpenAI-compatible clients (Open WebUI, LobeChat, etc.) send
message content as an array of typed parts instead of a plain string:
[{"type": "text", "text": "hello"}]
The agent pipeline expects strings, so these array payloads caused
silent failures or empty messages.
Add _normalize_chat_content() with defensive limits (recursion depth,
list size, output length) and apply it to both the Chat Completions
and Responses API endpoints. The Responses path had inline
normalization that only handled input_text/output_text — the shared
function also handles the standard 'text' type.
Salvaged from PR #7980 (ikelvingo) — only the content normalization;
the SSE and Weixin changes in that PR were regressions and are not
included.
Co-authored-by: ikelvingo <ikelvingo@users.noreply.github.com>
- Test that auxiliary.compression.context_length from config is forwarded
to get_model_context_length (positive case)
- Test that invalid/non-integer config values are silently ignored
- Fix _make_agent() to set config=None (cherry-picked code reads self.config)
Four fixes for the Weixin/WeChat adapter, synthesized from the best
aspects of community PRs #8407, #8521, #8360, #7695, #8308, #8525,
#7531, #8144, #8251.
1. Streaming cursor (▉) stuck permanently — WeChat doesn't support
message editing, so the cursor appended during streaming can never
be removed. Add SUPPORTS_MESSAGE_EDITING = False to WeixinAdapter
and check it in gateway/run.py to use an empty cursor for non-edit
platforms. (Fixes#8307, #8326)
2. Media upload failures — two bugs in _send_file():
a) upload_full_url path used PUT (404 on WeChat CDN); now uses POST.
b) aes_key was base64(raw_bytes) but the iLink API expects
base64(hex_string); images showed as grey boxes. (Fixes#8352, #7529)
Also: unified both upload paths into _upload_ciphertext(), preferring
upload_full_url. Added send_video/send_voice methods and voice_item
media builder for audio/.silk files. Added video_md5 field.
3. Markdown links stripped — WeChat can't render [text](url), so
format_message() now converts them to 'text (url)' plaintext.
Code blocks are preserved. (Fixes#7617)
4. Blank message prevention — three guards:
a) _split_text_for_weixin_delivery('') returns [] not ['']
b) send() filters empty/whitespace chunks before _send_text_chunk
c) _send_message() raises ValueError for empty text as safety net
Community credit: joei4cm (#8407), lyonDan (#8521), SKFDJKLDG (#8360),
tomqiaozc (#7695), joshleeeeee (#8308), luoxiao6645(#8525),
longsizhuo (#7531), Astral-Yang (#8144), QingWei-Li (#8251).
Combines detection from both PRs into _detect_openclaw_processes():
- Cross-platform process scan (pgrep/tasklist/PowerShell) from PR #8102
- systemd service check from PR #8555
- Returns list[str] with details about what's found
Fixes in cleanup warning (from PR #8555):
- print_warning -> print_error/print_info (print_warning not in import chain)
- Added isatty() guard for non-interactive sessions
- Removed duplicate _check_openclaw_running() in favor of shared function
Updated all tests to match new API.
- Use PowerShell to inspect node.exe command lines on Windows,
since tasklist output does not include them.
- Also check for dedicated openclaw.exe/clawd.exe processes.
- Skip the interactive prompt in non-interactive sessions so the
preview-only behavior is preserved.
- Update tests accordingly.
Relates to #7907
Add _is_openclaw_running() and _warn_if_openclaw_running() to detect
OpenClaw processes (via pgrep/tasklist) before hermes claw migrate.
Warns the user that messaging platforms only allow one active session
per bot token, and lets them cancel or continue.
Fixes#7907
